Effect of Phase Inversion Temperature on the Formation and Performance of PES/DMF/PVP Polyethersulfone Membranes
Загрузки
The paper studies the preparation of polymer membranes from 15% polyethersulfone solutions of PES/DMP/5%PVP and PES/DMP/7%PVP compositions using the phase inversion method at different precipitation temperatures. Two groups of polyethersulfone membranes were obtained and precipitation was carried out for each at four temperatures (10℃, 20℃, 30℃, 40℃). The particle sizes and degree of polydispersity in the casting solutions were studied on a Malvern analyzer. The optimal temperature for conducting phase inversion at two different PVP concentrations and the influence of the coagulation bath temperature on the performance, structure, and pore size of the resulting membranes were determined. Membranes precipitated from a solution containing 5% PVP showed better performance and structure than membranes precipitated at 20℃, and membranes precipitated from a solution containing 7% PVP showed better performance and structure than membranes precipitated at 30℃.
Скачивания
A. Al Malek, M.N. Abu Seman, D.Johnson, N.Hilal , Formation and characterization of polyethersulfone membranes using different concentrations of polyvinylpyrrolidone, Desalination, 288, 31-39 (2012) 2 J. JAGANGELO, R. TRUSSEL, M. WATSON: Role of Membrane Technology in Drinking Water, Reatment in the United, Desalination 113,119-127, (1997).
C.B. Spricigo, J.C.C. Petrus, R.A.F. Machado, L.A.V. Sarmento, A. Bolsan , Preparation and characterization of polyehtersulfone membranes for use in supercritical medium, Journal of Membrane Science, v.205, 273-278,(2002)
G. BIBILEISHVILI, N. GOGESASHVILI, M. KEZHERASHVILI, L. KUPARADZE, Z. JAVASHVILI: Influence of Some Factors on Characteristics of Poly-m-phenyleneisophtalamide Membranes - Preparation and Examination of Polyamide Membranes. Oxidation Communications 45(2), 300–308. (2022).
N. GOGESASHVILI, L. KUPARADZE, L. EBANOIDZE, Z. JAVASHVILI: Obtaining of Natural Water Microfiltration Membranes Based on Polyethersulphone With PEG 300, PEG 600 and LiCl Additives. Oxidation Communication 47(3), 543–550 (2024).
G. BIBILEISHVILI, M. KEZHERASHVILI, N. GOGESASHVILI, L. KUPHARADZE, L. EBANOIDZE: Effect of the Temperature of the Non-Solvent on the Morphology of the Polymeric Membrane. European Journal of Scientific Research, 161(1), 5 – 15, (2022).
C. BARTH, M. GONCALVES, A. PIRES, J. ROEDER, B. WOLF: Asymmetric Polysulfone and Polyethersulfone Membranes: of Thermodynamic Conditions During formation on their performance. Journal Membrane Science 169(2), 287–299, (2000).
G. BIBILEISHVILI, M. KEZHERASHVILI, M. MAMULASHVILI: Effect of Different Solvents and Fore-Forming Agents on Morphology and Performance of Polyethersulphone Membranes. Oxidation Communication 47(3), 534–542 (2024).
Copyright (c) 2025 Georgian Scientists
Это произведение доступно по лицензии Creative Commons «Attribution-NonCommercial-NoDerivatives» («Атрибуция — Некоммерческое использование — Без производных произведений») 4.0 Всемирная.
