EFFECTS OF SMALL DOSES OF RADON DURING THE USE OF REMOVABLE ORTHOPEDIC STRUCTURES IN DENTAL PRACTICE
DOI:
https://doi.org/10.52340/jecm.2023.01.04Ключевые слова:
Radon, orthopedic, dental practiceАннотация
From the obtained results, we can conclude that small doses of radon or radon hormesis have a positive effect even in the following weeks, which was clearly seen on patients living in Tskaltubo who use Tskaltubo water for swab, where adaptation to removable prostheses was seen already after 1 week and completely in 2 weeks and following weeks, which we could not say about the patients living in Tbilisi where adaptation started after 4 weeks, e.g. 28.9% did not fit the prosthesis even after 2 months and it became even more difficult in the following period and it was mostly found in the upper jaw and palate areas. Thus, it can be concluded that Tskaltubo's radon-containing water has a hormetic effect, and its positive effect is noticeable in the pressure areas of the removable prosthesis after two weeks, which was observed in patients with a high degree of adaptation.
Скачивания
Библиографические ссылки
Балкаров А.О., Карданова С.Ю., Хулаев И.В., Шхагапсоева К.А., Гендугова О.М. состояние слизистой оболочки полости рта у лиц, ползующихся сьемными протезами // Современные проблемы науки и образования. – 2018. – № 5
Kokich V.O., Kiyak H.A., Shapiro P.A. Comparing the Perception of Dentists and Lay People to Altered Dental Esthetics. J. Esthet. Dent. 2009; 11: 311-324.
Sato Y.K., Tsugar Y. Abe Analysis of stiffness and stress in I-bar clasps. J. Oral Rehab. 2011;28(6):596-600.
Sato Y.R. Hosokawa Proximal Plate in Conventional Circumferential Cast Clasp Retention. J. Prosthet. Dent. 2007; 83(3): 319-322.
Kochurova E.V., Nikolenko V.N. Matrixins in the Salivary Fluid of Patients with Tumors of the Maxillofacial Region during Orthopedic Rehabilitation with Different Prosthetic Structures. Bulletin of Experimental Biology and Medicine. 2017; 163(5): 663-666
Wiens J.P., Litvak Н. Occlusion for fixed prosthodontics: a historical perspective of the gnathological influence. J. Pros-thet. Dent. 2008; 99(4): 299-313. 8.
Adeyemo W.L., Taiwo O.A., Oderinu O.H., Adeyemi M.F., Ladeinde A.L., Ogunlewe M.O. Oral health-related quality of life following non-surgical (routine) tooth extraction: A pilot study. Contemp Clin Dent. 2012; 3(4): 427-432. 9.
Ribeiro A.A. Comparison of shear bond strength of orthodontics brackets on composite resin restorations with different surface treatments. Dental Press J Orthod. 2013; 18(4): 98-103.
Lee Keun-Young, Jin-Woo Cho, Na-Young Chang, Jong-Moon Chae, Kyung-Hwa Kang, Sang-Cheol Kim and Jin-Hyoung Cho. 2015.
Accuracy of Three-Dimensional Printing for Manufacturing Replica Teeth. The Korean Journal of Orthodontics 45 (5): 217. 27.
Liu Qingbin, Ming C. Leu and Stephen M. Schmitt. 2006. Rapid Prototyping in Dentistry: Technology and Application. The International Journal of Advanced Manufacturing Technology 29 (3–4): 317–35. 28.
Louvrier A., P. Marty, A. Barrabé, E. Euvrard, B. Chatelain, E. Weber, and C. Meyer. 2017. How Useful Is 3D Printing in Maxillofacial Surgery? Journal of Stomatology, Oral and Maxillofacial Surgery. Elsevier Masson SAS 118(4): 206–212. 29.
Martins Leandro Moura, Fabio Cesar Lorenzoni, Alcides Oliveira de Melo, Luciana Mendonça da Silva, José Luiz G. de Oliveira, Pedro Cesar Garcia de Oliveira and Gerson Bonfante. 2012. Internal Fit of Two All-Ceramic Systems and Metal-Ceramic Crowns. Journal of Applied Oral Science 20 (2): 235–40.
Miyazaki T. and Y. Hotta. 2011. CAD/CAM Systems Available for the Fabrication of Crown and Bridge Restorations. Australian Dental Journal 56 (SUPPL. 1): 97–106.
Rapid Prototyping and Stereolithography in Dentistry. Journal of Pharmacy and Bioallied Sciences. Medknow Publications 7(1): 216–219.
Neumeister André, Linda Schulz and Christoph Glodecki. 2017. Investigations on the Accuracy of 3D Printed Drill Guides for Dental Implantology. Int Journal of Computerized Dentistry 20(1): 35–51.
Salmi Mika, Kaija Stiina Paloheimo, Jukka Tuomi, Jan Wolff and Antti Mäkitie. Accuracy of Medical Models Made by Additive Manufacturing (Rapid Manufacturing). Journal of Cranio-Maxillofacial Surgery. 2013; 41(7): 603–9.